A Guide to Wood Science
The study of wood as a renewable material and organic material is what is known as wood science. Wood technology is now the way the tools are utilized in the processes of wood preservation. To be able to study wood it has to be compared to other products. The comparison made against other products will include the features of the material against those of wood, the value and the ease it can be worked on. The many Merits of timber and these technologies improve wood to be superior over other products. The wide range of products where wood can be used is just one of the many advantages that give wood an upper hand over other products. Once a tree has been cut down another can be planted in the same spot. All the parts of wood can be put into use, and this makes it a better fit than other materials which most of their byproducts are a waste.
The good appearance of your timber made structure cannot be guaranteed if protection of the timber is not done. This protection is from moisture and insects which are the biggest threat to wood. The moisture courses the timber to decay and the insects eat through the wood. Alkaline copper Quaternary or the ACQ has turned out to be a very effective way wood preservation. The protection of from this chemical is based on copper. Although being a good method to use for wood protection it has presents some few challenges. The chemical is highly corrosive to most metals, the chemical corrodes away galvanized fasteners and therefore only stainless steel is used. The concentration of the chemical that will be used to treat a piece of wood will depend on the where it is going to be used and the molecular structure of the wood. The concentration level of the chemical will be different for two pieces of wood where one is used above ground and the other close to a water body.
The use of copper metal is another method of wood treatment that is fast being accepted. The use of this method is fast being accepted because it is not corroding the metal fasteners. Micronized copper wood preservative is the correct term to refer this type of preservation. The copper metal is applied to the wood as small microscopic particles injected into the wood at high pressure. The process eliminates the need to dissolve the copper as is done in earlier copper-based preservatives. This process is highly effective and the wood properties and heightened. The timber treated in this way is used in both outdoor and indoor frames that last very long.
The micronized copper preservative has proven to be highly effective in protecting the wood against fungal decay and termites. Unlike other methods of treatment this method is not corrosive. The wood treated using this method last longer and is stronger.